CURRENT PAGE: HOME / PRODUCTS / DK (INWARD OPENING) WOODEN WINDOWS

INWARD OPENING
WOODEN WINDOWS

Inward opening wooden windows have many advantages compared to other products because of their functionality. The windows have both turn and tilt opening plus are equipped with a micro-ventilation solution and are very easily adjustable if needed. The possibility to choose from three different profile thicknesses enables us to provide the best solution for warm climates or summer cottages to passive houses alike.

OPENING STYLES

TILT AND TURN OPENING

Tilt and turn opening is the most common opening type for inward opening German type (DK) windows, balcony doors and the active sashes of tilt and slide as well as folding doors. We offer one security point and micro-ventilation as standard.

TURN OPENING

Turn opening, also known as opening to the side is the easiest opening for a window. This opening style is used for some DK windows, balcony doors and folding doors.

TILT OPENING

Tilt opening is efficient when opening the window only for ventilation is needed. This type is commonly used as smoke ventilation window.

TECHNICAL DATA

68mm, 78mm and 92mm profile thicknesses provide fitting solutions from warm climates or summer cottages to passive houses alike.

Please turn on the device to see the technical data table.

  
IV68 Window

IV78 Window

IV92 Window
Opening style Inward (DK) Inward (DK) Inward (DK)
Thermal transmittance coefficient (U-value) (for standard 1230x1480mm openable window) (wood – pine) Uw=1,4 W/m2K Uw=0,89 W/m2K Uw=0,78 W/m2K
Thermal transmittance coefficient (U-value) (for standard 1230x1480mm non-openable window) (wood – pine) Uw=1,3 W/m2K Uw=0,83 W/m2K Uw=0,7 W/m2K
Glazing (standard solution) 2k 4-18ar-4es (Ug – 1,1 W/m2K) 3k 4es-14ChrU ar-4-14ChrU ar-4es (Ug-0,6 W/m2K) 3k 4es-18ChrU ar-4-18ChrU ar-4es (Ug-0,5 W/m2K)
Sound reduction value (Standard solution) Rw (C, Ctr) 33 (-1, -4) dB Rw (C,Ctr) 34 (-1,-4) dB Rw (C, Ctr) 36 (-1, -5) dB
Depth of frame and sash 68 mm 78 mm 92 mm
Glazing thickness 24-30 (standard 26mm) 34 – 40 mm (standard 40mm) 48-54 mm (standard 48mm)
Air permeability Class 4 Class 4 Class 4
Resistance to wind load C5 C5 C5
Water tightness E900 E900 E900
Technical drawings      

FINISHING, MATERIALS, GLAZING AND HANDLES

STANDARD TRANSPARENT LASURS

STANDARD OPAQUE COLOURS


It is possible to choose colours from across the RAL map or make your pick from our special lasurs.
*Tones pictured may differ from the end result of the actual products because of the distortion of the monitor.

AS Lasita Aken produced its windows and doors mainly from pine (it is possible to choose from finger jointed or solid pine) but also from premium timber such as oak and meranti.

All of the timber used is bought from reliable partners whose products have certificates of compliances and necessary documents. The timber goes through multiple quality checks and all non-complying material is removed from production.

For increased stability, the scantlings are glued together from three or four lamellas and in principle are faultless from all sides. Raw material passes double quality inspection: primary inspection at intake of materials (visual inspection of moisture content and conformity) and secondary inspection at selection of materials prior production. The material is chosen based on moisture content, bending and wood defects and if possible materials with similar structures and colour shades are used together.

PINE (Type: Scots Pine; Pinus sylvestris – Latin)

Air dry density 480-530 kg/m3.
Most used tree species. Timber is with average strength, measure stable to humidity and is not impact resistant. For the solid material, the exterior lamellas have unified structure and tone throughout the lamella. For finger jointed material, differences in in structure and tone may occur.

 

MERANTI (Type: Shorea SPP – Latin)

Air dry density 580-770 kg/m3
The colour of unprocessed timber is from dark red-brown to lilac-brownish. Measure stable to humidity. Until three meters, solid, without finger joints material is used. Where possible, a batch contains materials with similar shades but differences may occur. To eliminate this, darker tones a recommended where differences are not seen.

OAK (Type: White oak, Quercus alba – Latin)

Air dry density 690-700 kg/m3
The timber is hard yet flexible with good strength properties. Very resistant to decomposition and extremely resistant to wood diseases. Solid material is used up to 4000mm. For longer details finger joints are used.

GLAZING

Good glazing is an essential part of any good window. In addition to the excellent energy saving characteristics quality glass units nowadays have, they offer many possibilities for comfort and protection. In our products it is possible to choose as extra between tempered and laminated glazing for protection, solar protection glazing to keep away the hot summer sun, sound reduction glasses as well as self-cleaning glazing. A well thought through glazing package ensures comfortable living for many years.

READ MORE

HANDLES

A well picked handle is for a window like an icing on a cake working both as an interior design element and a functional tool. As standard we supply handles in a variety of colours from the Hoppe Tokyo design. As per request, it is possible to choose from a wide range of handles.

READ MORE

ASK FOR MORE

Contact

TALLINN, Lelle 22, 11318
TARTU, Tähe 133c, 50107
E-mail: lasita@lasita.ee

RĪGA, Latvia, Daugavgrīvas iela 23, Zemgales priekšpilsēta, LV-1048
Tel. +371 26193638

Ask more about the product